Rigid Insulator Cover CC-DTT-CF
- C/F neck, double tie top insulating cover with 2 rigid 36″ sleeves
- 91.5″-95.5″ length provides superior coverage
- Top caps and middle sleeve adjusts/extends for perfect fit over insulators
- No locking pins
Install support
Installation // Hotsticks
Insulator Cover Portfolio Review
Product Description
Our Rigid Insulator Covers snap-fit into position and are easily hotstickable – no locking pins! Cap covers energized portion of the insulator, allowing sheds to naturally clean and be easily viewed during inspections.
Additional Information
| Flame Retardant Rating | V-0 |
|---|---|
| Hotstick Friendly | Yes |
| Hotstick Installation Tool | CC-AT |
| Insulator ANSI Class | 55-2, 55-3, 55-4, 55-5 |
| Insulator Application | Double Pin / Post |
| Insulator Conductor Application | < 795 MCM |
| Insulator Coverage | 91.5-95.5 in (232.41-242.57 cm) |
| Insulator Neck Size | C Neck 2.25-2.88 in (5.72-7.3 cm), F Neck 2.25-2.88 in (5.72-7.3 cm) |
| Insulator Neck Type | Tie Top |
| Material | RPVC |
| Package Quantity | 5 |
| Voltage Rating (up to) | 35 kV |
| Wind Resistance Rating | 100 mph |
|
Tests |
Results |
|
IEEE 1656 / 5.2 Dry Withstand |
>20 kV |
|
IEEE 1656 / 5.6 Ultraviolet Aging / ASTM G-155 |
1,000 hrs |
|
ASTM D149 Dielectric Strength |
938 V/mil (36.9 kV/mm) |
|
ASTM D 3638 Comparative Tracking Index |
526 V |
|
ASTM D-638 / D-1822 Original Tensile Impact |
56.7 ft lb/sq in |
|
ASTM D -638/ D-1822 Weathered Tensile Strength |
51.04 ft lb/sq in |
